6
Connecting the SLP to your computer
Use the USB or serial cable provided with the SLP 410/420/430/440/450 to connect the
SLP to your computer.
CAUTION:
Connecting or disconnecting the interface cable
while the printer is turned on may damage the printer.
Follow these steps:
1
Make sure that the SLP is turned off. If the status light is on, hold the power button
until it turns off.
2
Connect the printer to your PC or Mac.
• The SLP can be connected to either the Serial or USB port on your PC. On a Mac use
the USB port.
• Insert either the USB or Serial cable into the appropriate port on your computer.
Do not
use both cables.
• If all USB ports are in use, you may need to purchase a USB hub.
Note...
Serial ports are also called COM ports — COM1, COM2, COM3, etc. If your COM
ports are all in use, purchase either another serial port or an “A-B” switch box to connect
the SLP and another device to the same port.
• Connect the other end of the cable into the appropriate port on the back of the SLP.
Do not use
both cables.
or
Serial port
USB port
Serial cable
USB cable
Summary of Contents for 410
Page 24: ......
