EN
EN - 6
EN - 7
locking is indicated by a click. Insert the bottom plate in the same way.
Warning:
Never combine replaceable plates. Always use plates of the same type.
Use
1. Insert the plates into the appliance according to the intended type of cooking.
2.
Before using for the first time, coat the boards with a small amount of butter or oil.
3. Plug the power cord into a power outlet. The red LED lights up. This indicates that
the appliance is connected to the power supply.
4. The process of heating to operating temperature starts. The heating time lasts 5 – 8
minutes.
5. Once the green LED lights up, the appliance is ready for use. The green LED will
light up and go out during use. This indicates that the plates are warming up to
operating temperature. It is not necessary to interrupt the cooking process.
6. Release the lock and carefully lift the top cover.
7. Place the prepared food on the bottom plate, close and press the top plate on the
bottom one. Secure the handles with the lock.
Note:
If you have placed too much or too many pieces of food, you will not be
able to close the handles. Remove some food or cut it into smaller pieces.
Never force the handles closed. You could damage the appliance.
8. After 2-3 minutes, unlock the lock and open the top cover to check the toasting
status. When the dish is ready, remove it using a wooden or heat-resistant plastic
spatula. If the food is not done, close the top cover and continue cooking.
Warning:
Never use metal utensils, knives or forks to remove food. You could scratch
the non-stick coating of the removable plates.
9. Before cooking other food, close the appliance and let it warm up again to the
operating temperature (the green LED lights up).
10. Once all the food has been processed, unplug the appliance the power outlet and
let the appliance cool down.
CLEANING AND MAINTENANCE
Before cleaning or any maintenance, always switch off the appliance, disconnect the
plug from the power outlet and allow it to cool down completely.
Warning:
Never immerse the appliance, the power cable and plug in water or any
other liquid.
Do not use plastic or metal scrapers, harsh cleaners, chemicals, gasoline, solvents or
other similar substances to clean parts of the appliance. The surface finish could be
seriously damaged.
Clean the appliance, especially the replaceable plates, after each use. Use a slightly
dampened soft sponge for cleaning. Then wipe dry with a clean cloth.
Summary of Contents for SGR-SM-D131SS
Page 3: ...1 2 3 4 7 6 5 8 10 9 11 12 ...
Page 49: ......
