Sigur MR1, Manual, Page: 26 / 36

26 Installation Manual
MOUNTING DIRECTLY ON THE WALL 4.2.
1. Choose the location where you want to
install your reader. Locate the fastening
points, using the wall-mounted panel (2)
as a template.
2. Drill four holes 6 mm in diameter and
45 mm deep at the fastening points and
a hole for the cable.
3. Install wall anchors (included) into
the drilled holes.
4. Screw the wall-mounted panel of the
reader so that the text “UP” is at the top.
5. Feed the cable from the PACS controller
through.
x4