Packaging/Transport/Returning
Instruction Manual VisGuard 2 Extractive
14265E/1
39
13
Packaging/Transport/Returning
DANGER!
Injuries to persons due to hazardous media residues in the returned instrument.
Instruments that have come into contact with hazardous media may not be sent without the
appropriate information on the corresponding repairs or professional decontamination (see
RMA-form).
Precise information on the medium must be received by SIGRIST-PHOTOMETER in ad-
vance of the instrument to be repaired so that the necessary precautions can be taken
when unpacking it.
The original packaging materials should be used for packaging the VisGuard 2 Extractive if
possible. If the original packaging is no longer available, note the following information:
Before packaging, close the openings of the instrument with adhesive tape or plugs so
that no packaging materials can enter the instrument.
The instrument contains optical and electronic components. Make sure that the pack a-
ging protects the instrument from being damaged by impacts during transport.
All peripheral devices and accessory parts must be packaged separately and marked with
the serial number of the photometer (Section 2.2). This prevents confusion and mix-ups
later while also making it easier to identify parts.
All instruments and spare parts, which are returned, must be accompanied by the RMA
form (14711E). It can be downloaded from
When packaged in the way described above, the instruments can be transported by the us u-
al shipping methods and in all positions.
