The
DSL
command allows to view statistics, to enter or to change settings of
the DSL interface.
The command invoked with no option displays current settings of the interface
: dsl
DSL: CFG=PREACT Rate=192 Code=TCPAM16 MASTER Annex=F – OFFLINE
:
3.3.1 “Master”/”slave” mode selection
Configure one peer modem as “master”, do another one as “slave” for proper
operation.
This is performed by the
dsl
command with the
master
or
slave
options:
: dsl master
DSL: CFG=LOCAL Rate=512 Code=TCPAM8 MASTER Annex=A - OFFLINE
: dsl slave
DSL: CFG=LOCAL Rate=512 Code=TCPAM8 SLAVE Annex=A – OFFLINE
:
3.3.2 Setting DSL rate
Modems with firmware version 2.5 or higher have the ability to set DSL rate
from a “master” modem. The ability to set the rate manually at the both ends
of the line is supported as well.
3.3.2.1 Setting DSL rate from “master” modem
In order to control the rate by accessing the “master” modem only, configure
both modems beforehand for Preactivation (
dsl cfg preact
) and Annex F
(
dsl annex f
):
: dsl cfg preact annex f
DSL: CFG=PREACT Rate=2304 Code=TCPAM16 MASTER Annex=F - OFFLINE
:
22
