9
ENG-44 Specifications
Country of Manufacture:
USA
Input Impedance:
2K, transformer balanced
Output Impedance :
600 Ohms (both balanced and unbalanced line level outputs)
Frequency Response:
20Hz to 20kHz +/- 1.5dB
Distortion:
<.1% (1kHz @ 0dBu output)
Noise:
-126dBu EIN
Overall Gain:
66dB
Output Clipping level:
>22dBu
Low Cut Filters:
100 Hz, -6db/octave roll off
Tone Oscillator:
1kHz, +/- 5%, <0.2% THD (@ 0dBu)
Aux Input:
unbalanced line level, input impedance of 47K Ohms,
AC coupled, via stereo 1/8" (3.5mm) jack
Tape Return:
input impedance 10K, Left/Right input levels independently
adjustable
Headphone Output:
10 Ohms output impedance
Phantom Power:
+48VDC "48PH", individually switchable,
14mA maximum (total of all microphones)
Battery Life:
14 hours normal mixer operation
Internal Power:
4X "AA" batteries; Alkaline (recommended)
or rechargeable NiMH (charging unit not included)
External Power:
9-18 VDC via 2.1 x 5.5mm coaxial power plug; center positive;
input protected against reversed polarity
Size:
1.5"x10.5"x6.5" (HxWxD), exclusive of detachable strap "ears"
Weight:
2.25 lbs (1.0kg) w/ alkaline batt
eries
Using an XLR-Pro™ Adapter
to connect balanced audio to your consumer/ prosumer video camera
Many consumer/prosumer camcorders only offer an unbalanced 3.5mm (1/8”) audio
input. While you can connect directly to this input from the mixer using the mixer’s
3.5mm unbalanced audio output jack, this is not recommended for cable runs longer
than a few feet. This is because long unbalanced audio lines tend to pick up noise. The
longer the line, the worse the problem may be. To avoid this problem, you can purchase
a SignVideo XLR-Pro™ Audio Adapter and connect it to your camcorder. Then you can
feed a balanced audio signal from the XLR outputs of the mixer to the XLR inputs of the
XLR-Pro™ and use as long a cable as you need. The XLR-Pro™ provides an output
cable with 3.5mm stereo jack that can be directly connected to the camcorder.