6
ENG-44
Right Panel
1.
Boom Head Phone Out
XLR audio output for boom operator head phone
monitoring. XLR output allows use of cable with XLR connectors rather than one with ¼”
connectors. Use a ¼” adapter to connect to head phones. This way your spare XLR
cable also serves as your spare boom operator cable, and you only need carry a small
spare ¼” adapter. NOTE: The single head phone level control adjusts volume for both
the boom head phone out and the front panel head phone out.
2. XLR Outputs
2 Balanced line level audio outputs. Use switch located on the
underside panel of the unit to choose between mic and line level.
3. Line Out
Line level 3.5 mm (1/8”) unbalanced audio output jack. Can be used to
feed audio to cameras that only provide a 3.5 mm audio input jack. This is not
recommended when using cables longer than a few feet. For longer cables runs to
camera see the Using an XLR-Pro™ Adapter section of this manual.
4. Mic Out
Microphone level 3.5 mm (1/8”) unbalanced audio output jack. Can be used
to feed audio to cameras that only provide a mic level 3.5 mm audio input jack. This is
not recommended when using cables longer than a few feet. For longer cables runs to
camera see the Using an XLR-Pro™ Adapter section of this manual.
5. Auxiliary In
3.5 mm (1/8”) unbalanced audio input jack
6.
Tape Return In
3.5mm (1/8”) unbalanced audio input jack for connection to video
camera, tape recorder or other audio device.
7.
Power on/off Switch