-2-
Moonlite LED™
High Output Emergency Light
Fig. 2. SURFACE MOUNT WITH END BRACKETS
Fig. 3. SURFACE MOUNT TO J-BOX
END BRACKET
(2) SUPPLIED
CEILING
POLARIZED LAMP
CONNECTOR
POLARIZED LAMP
CONNECTOR
LAMP
HOUSING
MOUNT
SCREWS
(2) REQ'D
LAMP
ASSBY
COVER
SCREW
ANCHOR
BRACKET
SCREW
(4) SUPPLIED
LAMP
ASSBY
COVER
15 1/2”
CEILING
J- BOX
4” x 4”
GND
120/ 277 VAC
IN/ OUT
W
B
SURFACE MOUNT WITH END BRACKETS
1. See Fig 2. Install (2) screw anchors at 15 ½” centers.
2. Insert flat blade screwdriver under notch at end of cover, twist gently to release cover plate. Unscrew (4) #8 lamp assembly screws, lift lamp
assembly from Housing and disconnect lamp plug.
3. Attach end brackets with (4) #8 screws and nuts as shown, mount housing assembly to ceiling and route 120/77 VAC IN/OUT wiring into
housing.
4. Proceed as for STANDARD SURFACE MOUNT steps 4 - 5
SURFACE MOUNT TO J-BOX
1. See Fig 3. Install standard 4” J-box centrally above installation point as shown and secure to ceiling using appropriate screw anchors.
2. Route 120/ 277 VAC IN/OUT wiring into j-box.
3. Proceed as for STANDARD SURFACE MOUNT steps 4 - 5.
Series MHE-AC
L
G
N
04.15.01
