Coverlite
Series CVRAC
Recessed Emergency Light
Before connecting to power supply, TURN OFF ELECTRICAL
POWER AT CIRCUIT BREAKER OR FUSE
Disconnect generator line AC power before servicing.
Refer to wiring diagram for proper connections.
All servicing should be performed by qualified personnel.
Consult your local building code for approved wiring and installation.
Do not use outdoors.
Do not use this equipment for other than intended use.
INSTALLATION INSTRUCTIONS
IMPORTANT SAFEGUARDS
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
Coverlite
Series CVRAC
Recessed Emergency Light
Before connecting to power supply, TURN OFF ELECTRICAL
POWER AT CIRCUIT BREAKER OR FUSE
Disconnect generator line AC power before servicing.
Refer to wiring diagram for proper connections.
All servicing should be performed by qualified personnel.
Consult your local building code for approved wiring and installation.
Do not use outdoors.
Do not use this equipment for other than intended use.
INSTALLATION INSTRUCTIONS
IMPORTANT SAFEGUARDS
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
Coverlite
Series CVRAC
Recessed Emergency Light
Before connecting to power supply, TURN OFF ELECTRICAL
POWER AT CIRCUIT BREAKER OR FUSE
Disconnect generator line AC power before servicing.
Refer to wiring diagram for proper connections.
All servicing should be performed by qualified personnel.
Consult your local building code for approved wiring and installation.
Do not use outdoors.
Do not use this equipment for other than intended use.
INSTALLATION INSTRUCTIONS
IMPORTANT SAFEGUARDS
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
Coverlite
Series CVRAC
Recessed Emergency Light
Before connecting to power supply, TURN OFF ELECTRICAL
POWER AT CIRCUIT BREAKER OR FUSE
Disconnect generator line AC power before servicing.
Refer to wiring diagram for proper connections.
All servicing should be performed by qualified personnel.
Consult your local building code for approved wiring and installation.
Do not use outdoors.
Do not use this equipment for other than intended use.
INSTALLATION INSTRUCTIONS
IMPORTANT SAFEGUARDS
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
POWER
SUPPLY
ADJUSTABLE FOR
PANEL THICKNESS
¼- 1½"
LAMP HOUSING
SOLENOID
HIDDEN
MOUNT
SCREWS
2 REQD
FLEXIBLE
DOOR LINK
DOORS
ADJUSTABLE
THRU 90°
CONTROL BOARD
BACKBOX
PANEL CUTOUT 9" X 6"
LAMP HOUSING NUTS (4 REQD.)
NYLON SPACERS (4 REQD.)
2 SNAP- IN
POLARIZED
CONNECTORS
HINGED REFLECTIVE
DOOR ASSEMBLY
FULLY ADJUSTABLE
MR16 LAMP
ASSEMBLY
3 -STEP INSTALLATION
1
2
3
220 VFW Avenue, Grasonville, MD 21638
TEL: (410) 827-- 8300 Fax:(410)827- 8866
[email protected] www.signtexinc.com
Signtex Inc
LIGHTING
R
L I
D
S E
T
2003529
Suitable for indoor damp locations.
Do not let power cords touch hot surfaces.
Do not mount near gas or electric heaters.
Mount and secure the fixture at a location and height
to avoid ready access and tampering by unauthorized
persons.
The use of accessory equipment is not recommended by
the manufacturer and may cause an unsafe condition.
REV 03.11.1
