© 2000
–2020 signotec GmbH
signotec Sigma Lite user manual
Page 11 of 14
10.4.
Replacing the pen
It takes only a few steps to replace the pen. The cord is attached to the eyelet of the pen with a
loop. The loop is located at the top of the pen and is separated from the rest of the cord using a
small piece of metal. Pull the loop with the piece of metal towards the device distancing it from
the pen as far as possible. You can then pass the pen through the small loop so that the knot is
released. The cord is now pulled through the eyelet on the pen. Proceed in reverse order to attach
a new pen to the cord.
10.5.
Care and cleaning
Clean your device regularly. Dust and dirt particles can form residues on the sensor film or glass
and pen, which can cause excessive wear to the surface. Regular cleaning of the surface and the
pen will help to extend the device’s service life. Normal wear and tear of the surface or the pen
does not constitute a warranty claim.
To clean the device, only use very mild and diluted cleaning products; otherwise, the device may
be damaged. Use a dry or damp soft cloth to clean the pen. Never use thinning agents, benzine,
alcohol or other solvents for cleaning. Use an antistatic cloth or a dry or damp soft cloth to clean
the glass of the device. Only apply gentle pressure to the surfaces of the device and make sure
that no moisture forms on the surface or gets into any joints that may be present.
Any damage that is or has been caused, for example, by using the wrong cleaning agent and/or
during cleaning, is not covered by warranty.
11.
Warranty
Within the warranty period, signotec GmbH will repair free of charge all defects of the product that
are caused by processing errors or material defects. It is at the discretion of signotec to repair or
replace individual parts or the entire product. The replacement can mean new or repaired parts or a
new or repaired product. Repaired parts or products must correspond to a new product in terms of
functionality. The repaired parts or products only receive the remaining term of the original warranty
period. The replaced or defective parts become the property of signotec.
11.1.
Duration and nature of the warranty
a)
You receive a two-year carry-in warranty from the date of purchase with the purchase of a
signotec device. The date printed on the invoice is decisive in this regard. The warranty
period applies to the first customer and is non-transferable (in the event of resale).
b)
It is a carry-in warranty. An advance replacement is not part of this warranty and must be
agreed separately on request. The costs and related risks of transport are not assumed by
signotec.
c)
When purchasing the product, it is possible to purchase an extension of the warranty period
up to five years. This option is a one-off offer when ordering the product. It is not possible
to subsequently extend the warranty.
Caution:
Improper replacement of parts and use of accessories from
unauthorised sources may result in damage that is not covered by warranty.
