EV DC FAST CHARGER MANUAL
SIGNET SYSTEMS Inc.
15
10. Charging operation
DANGER
: TO PREVENT ELECTRICAL SHOCK, DO NOT TOUCH UNINSULATED PARTS OF THE
CHARGER DC OUTPUT CONNECTOR, BATTERY CONNECTOR, OR BATTERY TERMINALS. MAKE SURE
ALL ELECTRICAL CONNECTORS ARE IN GOOD WORKING CONDITION. DO NOT USE CONNECTORS
THAT ARE CRACKED OR CORRODED TO MAKE ADEQUATE ELECTRICAL CONTACT. USE OF A
DAMAGED OR DEFECTIVE CONNECTOR MAY RESULT IN A RISK OF OVERHEATING OR ELECTRIC
SHOCK.
10-1. Checking Installation condition
Make sure the charger has been installed according to the directions in this manual. Failure to do so could result
in personal injury and damage to the equipment.
10-2. Operating sequence
User Authentication
Release automatic lock on the power feed connector
Connect to electric vehicle
Prepare for charging
(Automatic locking of the power feed connector)
Start button
Charging
Stop
Charging completed
Initialization Preparation for charging
Isolation test
STOP button
