4
Signet 8450-1 Pressure Transmitter
Signet Pressure
Transmitter
Pressure Cal:
0.0 psi >
ENTER
Hysteresis
Time
Low Setpoint
Process
Output energized
Output relaxed
Hysteresis
Time
High Setpoint
Process
VIEW menu
•
During normal operation, the ProcessPro displays the VIEW menu.
•
When using the CALIBRATE or OPTIONS menus, the ProcessPro will return to the VIEW menu if no
activity occurs for 10 minutes.
•
To select the item you want displayed, press the UP or DOWN arrow keys. The items will scroll in a
continuous loop.
•
Changing the display selection does not interrupt system operations.
•
No keycode is necessary to change display selection.
•
Output settings cannot be edited from the VIEW menu.
3.3 Open
Collector
Output
The Open Collector output can be used as a switch that responds
when the process value moves above or below a setpoint, or it
can be used to generate a pulsing signal with a rate proportional
to the process value.
•
Low:
Output triggers when process variable is less than the setpoint.
The output will relax when the process variable moves above the
setpoint plus the hysteresis value.
•
High:
Output triggers when process variable is greater than the
setpoint. The output will relax when the process variable moves
below the setpoint plus the hysteresis value.
•
Off
The outputs may be disabled if not being used.
Monitor the pressure input from the sensor.
This is the permanent display.
Monitor the 4-20 mA Loop output.
Monitor date for scheduled maintenance or date of last calibration.
View Menu
Display
Description
Pressure:
60
psi
Loop Output:
12.00
mA
Last
Cal
06-30-03
The displays below are temporary. The permanent display will return after 10 minutes
