P9
Tel:+86-755-27608650 Fax:+86-755-27608651 [email protected]
Yijia Industrial Park, Fuqian Road, Guanlan Town, Baoan, Shenzhen, Guangdong, China
www.signcomplex.com
Straight arm bracket
D
:
100-150mm(3.94-5.91 inch) square pole
2.Open pole Cap.
1.Confirm installation location
according to installation hole.
3.Open pole Cap.
1.Confirm installation location according to installation hole.
2.Insert the light sensor into socket
with correct holes,then clockwise
rotate it into place.
Photocell Series
2.Open pole Cap.
1.Confirm installation location
according to installation hole.
Motion Sensor series
1. Confirm installation location
according to installation hole.
2. Connect exposed lamp wire to
power wire;
3. Fix lamp: fix the lamp in
installation position;
1. Insert the light sensor into socket
with correct holes,then clockwise
rotate it into place.
2. Confirm installation location
according to installation hole.
3. Connect exposed lamp wire to
power wire;
4. Fix lamp: fix the lamp in installation position;
Photocell Series
1. Confirm installation location according to installation hole.
2. Connect exposed lamp wire to power wire;
3. Fix lamp: fix the lamp in installation position;
4. Adust lighting angle of lamp(-90°~90°）;
5. Insert the Motion sensor into socket with correct holes,
then clockwise rotate it into place；
6. Fix and adjust angle screw, installation finish.
Motion Sensor series
Trunnion bracket:
5. Adust lighting angle of lamp(-90°~90°）;
6. Fix and adjust angle screw, installation finish.
4. Adust lighting angle
of lamp(-90°~90°）;
5. Fix and adjust angle screw,
installation finish.
3
.Open lamp cover.
4.Put all of the wire
through lamp-hole,
and align installation
hole of lamp to
installation hole of
lamp-hole,then
fasten screws of
lamp
.
5.Connect exposed
lamp wire to power wire
.
6.
Fix up lamp cover
and
pole Cap.
7.
Adjust the lamp
angle,
and
installation finish.
4
.Open lamp cover.
5.Put all of the wire
through lamp-hole,
and align installation
hole of lamp to
installation hole of
lamp-hole,then
fasten screws of
lamp
.
6.Connect exposed lamp
wire to power wire
.
7.
Fix up lamp cover
and
pole
Cap.
8.
Adjust the lamp
angle,and
installation finish.
5
.Insertthe Motion sensor into socket with correct
holes,then clockwise rotateit into place.
3
.Open lamp cover.
4.Put all of the wire through lamp-hole,
and align installation hole of lamp to
installation hole of lamp-hole,then fasten
screws of lamp
.
6.Connect exposed
lamp wire to power wire
.
7.
Fix up lamp cover
and
pole Cap.
8.
Adjust the lamp
angle,and
installation finish.
Signcomplex
We bring innovation and give inspiration