9
www.signaturebrand.co
CLEANING AND CARE
WARNING!
DO NOT IMMERSE THE APPLIANCE IN WATER OR ANY OTHER LIQUID.
Ensure that the steam mop is switched off and
disconnected from the mains outlet before
cleaning.
Limescale:
If you live in a particularly hard water area, we
recommend using bottled or distilled water.
Warning: never pour vinegar or other liquid
cleaners for eliminating calcium into water
tank.
After Using the Steam Mop:
Disconnect power supply, allow the steam
mop to cool completely and empty the
water left in water tank. Let the Steam Mop
completely cool down, clean with a damp cloth
or a nonabrasive (liquid) cleaner.
Decalcify the Water Tank:
To clean calcium deposits that build up inside
the water tank:
1. Add one or two tablespoons of white
vinegar to a full water tank.
2. Close the water tank cap and shake the
contents.
DO NOT TURN THE STEAMER
ON.
3. Let the unit sit for a few hours, then
empty the water tank.
4. Refill the tank with clean water and empty
it until it rinses clear.
Limescale Removal:
•
If your steam mop begins to produce
steam more slowly or completely stops,
you may need to remove limescale from
your appliance.
•
Limescale can develop over time on the
metal parts and greatly affect the mop’s
performance.
•
It’s necessary to remove limescale on a
regular basis every 25 to 50 times you
use a full tank of water (or at least once
a month), especially in hard water areas
and how often you use the steam mop.
1. Prepare a solution of 1/3 white vinegar &
2/3 tap water and add to the water tank.
2. Secure and position the unit to ensure
any released steam is aimed away from
the floor or surrounding objects and
surfaces.
3. Plug the steam mop in and turn it ON by
pressing the Power Switch (O/I). Allow
the appliance to produce steam until the
vinegar/water solution is used up.
4. Repeat the above procedures as many
times as necessary, until a normal steam
flow rate is achieved.
5. Fill the Water Tank with fresh water and
rinse it out.
6. Once the tank is empty, fill it again with
fresh water and attach it to the unit.
Release steam through the system until
the Water Tank is empty.
TO STORE YOUR APPLIANCE:
•
Ensure that the appliance has been
emptied of water and is clean and dry
before you store it.
•
Store the appliance in a cool and dry
place.
WARNING:
DO NOT IMMERSE ANY PART OF THE
APPLIANCE IN WATER
