Note :
● Any installation work must be carried out by a qualified electrician or
competent person.
● Do not connect the ducting system of the hood to any existing
ventilation system which is being used for any other appliance, such
as warmer tube, gas tube, and hot wind tube.
● The angle of the bend of the ventilation pipe should not be less than
120º; you must direct the pipe horizontally, or, alternatively, the pipe
should go up from the initial point and should be led to an outer wall.
● After the installation, make sure that the cooker hood is level to avoid
grease collection at on end. See Pic.
9
●
For safety reason, please use only the same size of fixing or mounting
screw which are recommended in this instruction manual.
●
Warning: Failure to install the screws or fixing device in accordance
with these instructions may result in electrical hazards.
-
23
-
$