26
Adjusting Door Panels
Fine adjustments can now be made to align the door
panels.
1. To adjust the door panel horizontally, slide the panel
support screws left or right in the slotted holes as
desired. Have an assistant hold the panel in place
while you tighten the support screws and insert and
tighten all remaining mounting screws.
2. To adjust the door panel vertically or back and
forward, loosen the screws in the appliance door
bracket. Move the plastic rails to make adjustments
as desired. Have an assistant hold the bracket in
place while you tighten all the bracket screws.
Installing Door Trim
After panels have been adjusted, install the decorative
side trim on the doors.
To install, start at the middle and align the trim with the
place by pushing the trim toward the back of the panel.
Once the middle is secure, continue the installation
upward until the remaining trim is completely secure.
Door tirm
Door tirm
Door tirm
In and out
Plastic rail
Up and down
Plastic rail
Door trim
Door trim
