20
B
Aligning and Leveling the Appliance
DEPTH ADJUSTMENT
Adjust the depth of the unit in the enclosure so the door
1. Measure the thickness of your decorative door
panels using the gauge tool.
S
place the gauge tool next to the panel. Mark the
notch on the gauge tool that matches the thickness
of the door panel.
2. Use the mark on the gauge tool to adjust the
depth of the appliance in the enclosure.
Place the gauge tool against the closed door of the
appliance at the side of the enclosure. The marked
notch on the gauge tool should align with the front
edge of the enclosure.
a
Rear adjustment
Front adjustment
b Gauge
a Edge
a
Rear adjustment
Front adjustment
b Gauge
a Edge
Measure panel thickness
Align depth of unit
Gauge tool
CABINETRY
FACE
FRAME
FRONT OF
UNIT
The front and rear leveling legs can both be adjusted
from the front.
P
shaft.
R
P
shaft.
a
Rear adjustment
Front adjustment
b Gauge
a Edge
Rear adjustment
Front adjustment
