20
OPERATION
Door Bins
To remove the door bins, hold the guide so that the
bin can not move and tap the bottom of the bin 2 or 3
times.
To assemble the door bin, align both sides of the bin
with the guides and push the bin down until it snaps
into place.
To adjust the location of the bin, tilt the front of the bin
up and slide the bin up or down to the desired
location.
Adjusting the Shelves
The shelves in the refrigerator are adjustable to meet
individual storage needs.
Adjusting the shelves to fit items of different heights
will make finding the exact item you want easier.
Detaching the Shelf
1
Tilt up the front of the shelf and then lift the shelf
straight up.
2
Pull the shelf out.
Assembling the Shelf
1
Tilt the front of the shelf up and guide the shelf
hooks into the slots at a desired height.
2
Lower the front of the shelf so that the hooks
drop into the slots.
CAUTION
•
Make sure that shelves are level from one side
to the other. Failure to do so may result in the
shelf falling or spilled food.
•
Do not clean glass shelves with warm water
while they are cold. Shelves may break if
exposed to sudden temperature changes or
impact.
•
Glass shelves are heavy. Use special care when
removing them.
Transmitter
Receiver
NOTE
•
Foreign objects and dirt between the right side of
shelf and the inner cabinet wall could prevent the
shelf light from turning on.
•
The shelf light turns on when the door is opened.
•
The shelf light turns off after seven minutes or when
the door is closed.
Summary of Contents for SKSFD3604P
Page 44: ...44 Memo MEMO ...
Page 88: ...44 AIDE MÉMOIRE AIDE MÉMOIRE ...
