RENATO RANGE HOOD INSTALLATION
6
Renato Range Hood Installation Instructions
Clean the hood and panel filters frequently per the
following instructions.
Do’s:
- Clean your range hood using a non-abrasive cloth or
sponge and a mild liquid dish soap.
- Always wipe in the direction of the grain pattern.
- After cleaning, rinse with warm water.
- Make sure range hood is wiped dry after cleaning to
avoid water marks.
Don’ts:
- Do not use steel wool or scouring pads, which will
scratch and leave iron residue that could lead to
rusting and corrosion.
- Do not wipe against the grain pattern as this could
impact the original finish.
- Do not use chlorine bleach.
Grease/Baffle Filter:
- Remove the filter by pulling the spring release
handle and then pulling down the filter.
- Wash filters as needed in dishwasher or hot deter
-
gent solution (low temperature, short cycle).
- If your model contains a grease tray, remove, drain,
and clean periodically.
- Make sure filters are completely dry before putting
back into the range hood.
- Reinstall the filter by making sure the spring release
handles are toward the front. Insert filter into upper
track. Push the spring release handle. Push up on filter
and release handle to latch into place.
CARE AND MAINTENENCE
OPERATING INSTRUCTIONS
-
-
III -
II -
I -
O-
Light OFF
Light ON
Fan Speed HIGH
Fan Speed MEDIUM
Fan Speed LOW
Fan OFF
Ⓖ
Fig.7
