Signametrics SM2060 Operator'S Manual Download Page 84

Page: 84 / 152

Signametrics

Description

Returns the minimum as a formatted string.

#include "SM206032.h"

int

DMMGetMinStr

(

int

nDmm, LPSTR

lpszReading

)

Remarks

This function is the string version of

DMMGetMin

. It returns the result as a string

formatted for print

int format is determined by the range and function. See

DMMGetMin

for more details.

Parameter

ing. The pr

Type/Description

nDmm

MMs are numbered starting with zero.

lpszReading

LPSTR

Points to a buffer (at least 64 characters long) to hold the

result.

urn value is one of the following constants, or the string length is OK.

Value

int

Identifies the DMM. D

Return Value

The ret

Meaning

DMM_OKAY

Negative Val

DMMGetRang

SM2060

;

SM2064

;

Description

Get DMM range code.

#include "SM206032.h"
#include "DM

int DMMGetRange

(

int nDmm

)

Remarks

This function returns the DMM range code. The range codes are in the sequence of 0, 1,
2, 3, … where 0 is the lowest range.

Parameter

Valid return

Error code

Example

char

cBuf[64];

int status = DMMGetMinStr(0, cBuf);

MUser.h"

Type/Description

nDmm

int

Identifies the DMM. DMMs are numbered starting

with zero.

Return Value

Integer value corresponding to the currently set DMM range, or an error code.

Value

Meaning

Zero or positive value

Range; zero being the lowest

;

GetRange == 0) printf("Lowest range selected");

Negative Value

Error code

Ex mple

int

if(DMM

Summary of Contents for SM2060

























































































































































Search results

Summary of Contents for SM2060

Reviews:

Signametrics SM2060, Operator'S Manual, Page: 84 / 152

Search results

Summary of Contents for SM2060

Reviews: