Signametrics SM2060 Operator'S Manual Download Page 69

Page: 69 / 152

Signametrics

Remarks

Delay

dTime

seconds.

dTime

must be a positive double number between 0.0 and 100.0

seconds.

Parameter

Type/Description

dTime

ue is one of the following constants.

Value

double

Delay time in seconds.

Return Value

The return val

Meaning

DMM_

uccessfully terminated

DMMDelayed

SM2060

;

SM2064

;

Description

DMM for

ion.

#include "SMX

nclude "SMX

int DMMDelayedTrigger

(

int

nDmm, double dDelay, int iSamples

)

Remarks

ayed ext

n of this c

it state, waiting for trigger edge

selected (see DMMSetTrigPolarity()). At the detection of the selected polarity,

waits f

ior to making iSamples samples. The value of

dDelay

can

be set between 0 and 1s. The samples are taken using the currently set function, range,

re (DMMS

stored in the DMM’s internal buffer. With the exception of the DMMReady and

mands, following the issue of DMMDelayedTrigger command,

ng the captured data. This function is

terval must be set between 0 (default) and 65ms. Aperture must be set between

60ms and 2.5us. The value of

iPostSamples

must be set between 1 and the buffer size.

The buffer size is 80 for Apertures of 160ms to 1.4ms, and 120 for Apertures in the range

ighest Aperture allowed for this operation is 160ms. Aperture

nd Read Interval are set using the

DMMSetAperture

and

DMMSetReadInteval

onitor completion of the

capture process. When the DMM is ready read the buffer using

DMMReadBuffer

the buffer. Once

DMMReady

returns

TRUE

, it should not be called again since it prepares the buffer for

ding when it

dition. Other related functions include;

DMMReady

DMMReadBuffer

DMMReadBufferStr

DMMSetReadInterval

DMMSetSync

DMMSetTrigP

OKAY

Operation s

Negative Value

Error code

Example

DMMDelay(1.2); /* wait for 1.2 Sec */

Trigger

Arm

delayed external trigger operat

2060.h"

Setup for del
receptio

ernal trigger capture mode (off the DIN7 connector). Following

ommand the DMM enters a wa

currently
the DMM

dDelay

Apertu

etAperture) and Read-Interval (DMMSetReadInterval). iSamples are

DMMDisarmTrigger com
no other function should be used prior to readi
usable in VDC, VAC, Ohms, IAC, RTD and ID

Read In
1

of 2.5µs to 625us. The h
a
functions, respectively.

Following

DMMDelayedTrigger

, use the

DMMReady

to m

DMMReadBufferStr

functions. Read iSamples measurements from

rea

detects a ready con

olarity

DMMDisarmTrigger

Summary of Contents for SM2060

























































































































































Search results

Summary of Contents for SM2060

Reviews:

Signametrics SM2060, Operator'S Manual, Page: 69 / 152

Search results

Summary of Contents for SM2060

Reviews: