SignaMax 065-9066 User Manual Download Page 8

Page: 8 / 54

Signamax Connectivity System 065-9066

www.signamax-us.com

www.signamax-eu.com

GSM

GSM Network is found and working properly

Flashing

Searching GSM Network

SMS

Short message waiting Indicator

Flashing

Sending short message

1.4.3 Rear Panel Descriptions

Port

Description

Phone

Phone port can be connected to analog telephone sets or Trunk Line

of PBX

Line

Can be Connected to PBX or CO line with RJ-11 analog line. PSTN not

FXO port, can’t connect PSTN to VoIP,. When PSTN call comes, it will

transfer to FXS port, let FXS can pick up call from VoIP or PSTN.

GSM

The port which you can Insert SIM Card

Antenna

Connector

Connect the antenna to the gateway.

WAN

Connect to the network with an Ethernet cable. This port allows your

ATA to be connected to an Internet Access device, e.g. router, cable

modem, ADSL modem, through a networking cable with RJ-45

connectors used on 10BaseT and 100BaseTX networks.

Reset

Push this button until 3 seconds, and ATA will be set to factory

default configuration.

Power

A power supply cable is inserted

Summary of Contents for 065-9066























































Search results

Summary of Contents for 065-9066

Reviews:

SignaMax 065-9066, User Manual, Page: 8 / 54

Search results

Summary of Contents for 065-9066

Reviews: