Signamax
™
065-7840C-WS 24-Port 10/100/1000BaseT/TX WebSmart Switch
Publication date: June, 2011
Revision 1.0
46
4-1. Web Management Home Overview
After login, System Information would be displayed as illustrated in Fig. 4-2.
This page lists default values and shows you the basic information of the switch,
including “Switch Status”, “TP Port Status”, “Fiber Port Status”, “Aggregation”,
“VLAN”, “Mirror”, “SNMP”, and “Maximum Packet Length”. With this information, you
will know the software version, MAC address, ports available and so on. It would be
helpful while malfunction occurred. For more details, please refer to Section 4-4-1.
Fig. 4-2
•
The Information Page Layout
⎯
On the top part of the information page, it shows the front panel of the switch.
Linked ports will be displayed in green color, and linked-off ones will be in black.
For the optional modules, the slots with no module will only show covered plates,
the other slots with installed modules would present modules. The images of
modules would depend on the ones you insert. Vice versa, if ports are
disconnected, they will show just in black.
⎯
On the left side, the main menu tree for web is listed in the page. According to
the function name in boldface type, all functions can be divided into three parts,
including “Configuration”, “Monitoring” and “Maintenance”. The functions of each
folder are described in its corresponding section respectively. The function
names in normal type are the sub-functions. When clicking it, the function is
performed. The following list is the main function tree for the web user interface:
Summary of Contents for 065-7940C-WS
Page 10: ......
