Signamax
™
065-7840C-WS 24-Port 10/100/1000BaseT/TX WebSmart Switch
Publication date: June, 2011
Revision 1.0
33
3-4. How does a switch work?
The switch is a layer 2 Ethernet Switch equipped with 24 ports which support
Gigabit Ethernet, 100M Ethernet, or 10M Ethernet. Each port on it is an
independent LAN segment and thus has 24 LAN segments and 24 collision
domains, in contrast to the traditional shared Ethernet HUB in which all ports share
the same media and use the same collision domain and thus limit the bandwidth
utilization. With switch’s separated collision domain, it can extend the LAN diameter
farther than the shared HUB does and highly improve the efficiency of the traffic
transmission.
Due to the architecture, the switch can provide full-duplex operation to
double the bandwidth per port and many other features, such as VLAN, bandwidth
aggregation and so on, not able to be supported in a shared hub.
Terminology
Separate Access Domains:
As per the description in the section headed “What’s Ethernet?”, Ethernet
utilizes CSMA/CD to arbitrate who can transmit data to the station(s) attached in the
LAN. When more than one station transmits data within the same slot time, the
signals will collide, referred to as collision. The arbitrator will arbitrate who should
gain the media. The arbitrator is a distributed mechanism in which all stations
contend to gain the media. Please refer to “What’s Ethernet?” for more details.
In Fig.3-5, assumed in half duplex, you will see some ports of the switch are
linked to a shared HUB, which connects many hosts, and some ports just are
individually linked to a single host. The hosts attached to a shared hub will be in the
same collision domain, separated by the switch, and use CSMA/CD rule. For the
host directly attached to the switch, because no other host(s) joins the traffic
contention, hence it will not be affected by CSMA/CD. These LAN segments are
separated in different access domains by the switch.
Micro-segmentation:
To have a port of the switch connected to a single host is referred to as
micro-segmentation. It has the following interesting characteristics.
-
There is no need for the access contention (e.g. Collision).
They have their own access domain. But, collision still could
happen between the host and the switch port.
-
When performing the full duplex, the collision vanishes.
-
The host owns a dedicated bandwidth of the port.
The switch port can run at different speeds, such as 10 Mbps, 100 Mbps, or
1000 Mbps. A shared hub cannot afford this.
Summary of Contents for 065-7940C-WS
Page 10: ......
