manualshive.com logo in svg

SignaMax 065-7910HPOEP, User Manual, Page: 25 / 89

Share
Download
SignaMax 065-7910HPOEP User Manual Download Page 25

                                                 

 

                

5 VLAN 

25 

 

 

5.3.2 802.1Q Configuration 

This tab page configures a VLAN group; each port can be configured as a specific state for this 

VLAN group: 

Tag

：

Indicates the port is a tagged member of the VLAN group. All packets forwarded by the 

port are tagged. The packets contain VLAN information. 

Untag

：

Indicates the port is an untagged VLAN member of the VLAN group. Packets 

forwarded by the port are untagged. 

Exclude

：

Excludes the port from the VLAN group. However, the port can be added to the 

VLAN group through GVRP. 

Forbidden

：

Does not allow the port to be added to the VLAN group, even if GVRP indicates 

so. 

 

5.3.3 802.1Q Port 

This tab page configures 802.1Q VLAN port parameters: 

Port 

: Specify the port to be configured.

 

PVID

: Each port can have only one Port VLAN ID (PVID), an untagged Ethernet package will 

be tagged a VID of PVID when arriving at the port. The default PVID is 1 for each port. 

Link Type

: Can choose 

Hybrid

 (by default), 

Access

 or 

Trunk

 from this drop-down list.   

 

Access

: An access port can belong to only one VLAN, and is generally used to connect 

Summary of Contents for 065-7910HPOEP


























































































Reviews:

No comments