4 Port Management
19
4.5 POE
POE (Power Over Ethernet) is referred to a technology as the existing Ethernet cabling infra
structure Cat.5 which do not make any changes, transmits data signals for some IP-based t
erminals(such as IP telephones, wireless LAN access point AP, network cameras etc.) , mea
nwhile provids DC power supply technology for such equipments.
This page has three tabs to configure various parameters POE
：
（
1
）
POE configuration
Power management mode
：
Allocation,Class. Allocation mode
can be directly assigned to the
PD power
;Class mode
will be based on the PD class to assign power required
,PD
is
classified as shown in the following table
.
PD classification
power range
0
（
default
）
0.44 to12.95
1
0.44 to3.84
2
3.84to6.49
3
6.49to12.95
4
Retained for future use
Max Power:
Set the POE power supply output the maximum value of total power
,the range is
0 to 720W.
