Signamax Connectivity System 065-7429
www.signamax-us.com
www.signamax-eu.com
commit Commit all the ACL and QoS Config to be valid
debug Debugging functions (see also 'undebug')
enable Modify enable password parameters
exit End current mode and down to previous mode
fib FIB information
help Description of the interactive help system
hostname Set system's network name
interface Select an interface to configure
ip Global IP configuration subcommands
key Authentication key management
line Configure a terminal line
log Logging control
mac Configure the MAC address table
maximum-paths Set multipath numbers installed to FIB
mls Global Multi-Layer Switching parameters
monitor Configure SPAN monitoring
move Move a access-list entry
mroute mroute info
no Negate a command or set its defaults
password Assign the terminal connection password
policy-map Policy map command
router Enable a routing process
router-id Router identifier for this system
service Set up miscellaneous service
shell execute shell command
snmp-server Modify SNMP engine parameters
spanning-tree config the spanning tree
vlan 802.1q VLAN status
1 ARP
1 ARP
1 ARP
1 ARP
1.1 configuration
1.1.1 arp {ip} {mac} {arpa} { fastethernet | gigabitethernet | port-channel |
vlan | }
Switch(config)#arp ?
A.B.C.D IP address of ARP entry
aging-time Set ARP entry maximum age
