Signamax
Hardened PoE Ethernt Switch
User’s Manual
13
Cabling
Step 1:
First, ensure the power of the switch and end devices are turned off.
<Note>
Always ensure that the power is off before any installation.
Step 2:
Prepare cable with corresponding connectors for each type of port
in use.
Step 3:
Consult the previous section for cabling requirements based on
connectors and speed.
Step 4:
Connect one end of the cable to the switch and the other end to a
desired device.
Step 5:
Once the connections between two end devices are made
successfully, turn on the power and the switch is operational.