14
Hardware Installation
Installation Steps
This section will explain how to install the Signamax 065-7407GPOEP 7-port industrial PoE+
gigabit unmanaged Ethernet switch.
Installation Steps
Step 1
Unpack the 065-7407GPOEP switch from the original packing box.
Step 2
Check if the DIN-Rail bracket is screwed on the switch.
If the DIN-Rail is not screwed on the switch, please refer to the
DIN-Rail Mounting
section for DIN-Rail installation.
If you want to wall mount the switch, please refer to the
Wall Mounting
section for
wall mounting installation.
Step 3
To hang the switch on a DIN-Rail or wall, please refer to the
Mounting Installation
section.
Step 4
Power on the switch, and then the power LED light will turn on.
If you need help on how to wire power, please refer to the
Wiring the Power Inputs
section.
Please refer to the
LED Indicators
section for LED light indication.
Step 5
Prepare the twisted-pair, straight-through category 5e or better cable for Ethernet
connection.
Step 6
Insert one side of the RJ-45 cable into switch’s Ethernet port and on the other side
into the networking device’s Ethernet port, e.g. switch, PC, or server. The Ethernet
port’s (RJ-45) LED on the industrial Ethernet switch will turn on when the cable is
connected to the networking device.
Please refer to the
LED Indicators
section for LED light indication.
Step 7
When all connections are set and the LED lights all show normal, the installation is
complete.
