9
To remove the LC connector from the transceiver, please follow the steps shown below:
Step 1
Press the upper side of the LC connector from the transceiver and pull it out to release
as shown below in Figure 2.12
Figure 2.12: Remove LC Connector
Step 2
Push down the metal clasp and pull the transceiver out by the plastic part as shown
below in Figure 2.13
Figure 2.13: Pull Out from the SFP Module
Wiring the Power Inputs
Please follow the below steps to insert the power wire.
Step 1
Insert the positive and negative wires into the PWR1 (V1+, V1-) and PWR2 (V2+, V2-)
contacts on the terminal block connector as shown below in Figure 2.14.
Figure 2.14: Power Terminal Block
