Hardened Ethernet Switch
13
Status LEDs
LED State
Indication
POWER
Steady
Switch is properly connected to power and turned on.
PWR1
PWR2
(Green)
Off
Switch is not connected to power and is turned off.
FAULT
Steady
3. Power failure occurred.
4. Port failure occurred (when port fault alarm dip
switch is enabled).
FAULT
(Red)
Off
3. Power failure is not occurred.
4. Port failure is not occurred (when port fault alarm
dip switch is enabled).
3. Port fault alarm dip switch is disabled.
10/100BaseT/TX
or
100BaseFX
Steady
A valid network connection established.
LNK stands for LINK.
LNK/ACT
(Green)
Flashing
Transmitting or receiving data.
ACT stands for ACTIVITY.
Steady
Light solid yellow for a port transferring at 100Mbps.
100
(Yellow)
Off
The port is transferring at 10Mbps If this LED is dark.
Physical Ports
This switch provides:
•
Five
10/100BaseT/TX
ports
•
Four
10/100BaseT/TX
ports + one
100BaseFX
port
•
Four
10/100BaseT/TX
ports + two
100BaseFX
ports
•
Eight
10/100BaseT/TX
ports
•
Eight
10/100BaseT/TX
ports + one
100BaseFX
port
•
Six
10/100BaseT/TX
ports + two
100BaseFX
ports
•
Four
10/100BaseT/TX
ports + four
100BaseFX
ports
CONNECTIVITY
•
RJ-45
connectors
•
SC or ST connector on
100BaseFX
fiber port
