Industrial Ethernet Extender
8
One-Channel Ethernet Extender
Ports
The Ethernet Extender provides one TX port and one Ethernet Extender
port.
For the TX port, it uses RJ-45 connector and auto senses the speed of
10/100 Mbps.
For the Ethernet Extender port, it uses RJ-11 connector and auto senses
the speed of 1/3/5/10/15/20/25/30/40/50Mbps.
Ethernet Extender Mode Settings
Ethernet Extender mode settings are made very simple by means of a 2
position switch at the rear panel of the Ethernet Extender.
Mode switch
There is one position on the Mode switch for Ethernet Extender mode
settings. Refer to the table below for more details. One end must be set to
Loc and the other to Rmt when two devices are connected.
Loc
Rmt
The device operates in local mode
The device operates in remote mode
Front Panel & LEDs
LED Indicators
The LED indicators give you instant feedback on status of the Ethernet
Extender:
