14
include a DNS server address which is configured with the SIP server address and will respond to
the query, and the appropriate domain name of the network.
If you wish to specify a special SIP domain name, you may enter the domain name here. If no
domain name is entered, the SIP domain name will be set to that of the network.
The currently provisioned SIP Server and Domain are displayed beside “SIP Server Settings” for
informational purposes.
Select whether or not to send a Registration Request to the SIP server by checking the box next
to “Send Registration Request”.
If you use Outbound SIP Proxy, you may fill in the Proxy IP address and Port. Otherwise, leave
them blank.
If you STUN server, you may fill in the STUN server IP address and Port. Otherwise, leave them
blank.
For the endpoint, set the dial plan to be used by all lines (refer to “Appendix D ” for details on
the dialplan representation), and select the transport method to be used for SIP signaling (either
UDP or TCP).
For each line on the endpoint (NOTE: SP200X has a single line), enter the Line Phone
Number, Caller-ID Name, signaling port value, authentication Username and Password, and
select if AEC is to be performed on this line.
Press “Save SIP Settings” to save the new values.
