Rev 1.1 | SC5317A & SC5318A
Hardware Manual
SignalCore, Inc.
24
SC5317A & SC5318A Hardware Manual
Bits Type Name
Width Description
[15]
R
loDoublerEnable
1
The frequency doubler status
[16]
R
deviceStandby
1
Power down status
[17]
R
bypassConv
1
RF conversion bypassed
[18]
R
ifOutEnable
1
Enable IF output port
[19]
R
invertSpectrum
1
IF spectrum inverted
[20]
R
rfAmpEnable
1
RF pre-amp enabled
[21]
R
autoGainEnable
1
Only reflects the software setting for gain
calculation, does not affect device.
[22]
R
autoAmpEnable
1
Only reflects the software setting for gain
calculation, does not affect device.
[63:23]
R
Invalid data
29
Ignore
Register 0x33 GET_DEVICE_INFO
Write to this register to query the device information such as serial number.
Bytes written 2
Bytes read 8
Bits Type Name
Width
Description
[3:0]
W
DeviceInfo
4
0: product serial number and Interface type
1: firmware and hardware revision
2: calibration and manufacture date
[7:4]
W
Unused
4
Ignore
[63:0]
R
Data
64
Information data (see Device Info data)
Register 0x34 CAL_EEPROM_READ
Write to this register to query 8 bytes of data from the calibration EEPROM at the starting address.
Bytes written 4
Bytes read 8