Series 4 Operating Manual - Nebula Issue 1.00
www.signal-group.com
P a g e
| 5
of 26
Read This First
Signal Group Ltd designs, manufactures and tests its products to meet many national and
international standards. Because these instruments are sophisticated technical products, you
MUST properly install, use, and maintain them to ensure they continue to operate within their
normal specifications. The following instructions MUST be adhered to and integrated into your
safety program when installing, using and maintaining Signal Group Ltd products. Failure to
follow the proper instructions may cause any one of the following situations to occur: Loss of
life; personal injury; property damage; damage to this instrument; and warranty invalidation.
‒
Read all instructions prior to installing, operating, and servicing the product.
‒
If you do not understand any of the instructions, contact your Signal Group Ltd
representative for clarification.
‒
Follow all warnings, cautions, and instructions marked on and supplied with the product.
‒
Inform and educate your personnel in the proper installation, operation, and maintenance
of the product.
‒
Install your equipment as specified in the Installation Instructions of the appropriate
Instruction Manual and per applicable local and national codes. Connect all products to the
proper electrical and pressure sources.
‒
To ensure proper performance, use qualified personnel to install, operate, update, program,
and maintain the product.
‒
When replacement parts are required, ensure that qualified people use replacement parts
specified by Signal Group Ltd.
Unauthorised parts and procedures can affect the product’s
performance, place the safe operation of your process at risk, and
VOID YOUR
WARRANTY
. Substitutions may result in fire, electrical hazards, or improper operation.
‒
Ensure that all equipment doors are closed, and protective covers are in place, except
when maintenance is being performed by qualified persons, to prevent electrical shock and
personal injury.
