Technical description and operating manual ST 167 and ST167W5
23
WLAN signals detection with ST167 is done by selecting «WLAN» («W» sign) DRT standard on lower line
of the display. After selecting consistent WLAN standard channels scanning will start.
As it seen from
«
Brief technical information» amount of channels in 5GHz range is three times bigger
than amount of channels in 2.4GHz, which leads to considerable time needed for this range analysis.
Three main types of communication organization will be considered:
Through the router/WAP: «Smartphone – router – remote device (next «RD») – PC, video camera etc.
Straight: «Smartphone – RD» - Wi Fi Direct.
Using of smartphone as an access point with subsequent data transfer in 2,3 and 4G networks.
Three main methods RD detection is considered:
1.
Based on displacement of ST167 for detection of active at search moment RD location.
2.
Using of AUTO mode with stationary position of ST167. Given method is used, for example, for visitors
RD presence.
3.
Using of EVENT LOG mode for RD detection, implementing accumulated data transfer in uncertain
period of time.
For second and third methods using
of special software “ST167 Analyzer”
is expediently
1 method
RD detection with using of ST167 is only possible if RD is active – data transfer. For this, if possible,
search should be done during worktime with important meeting imitation.
But, if in moment of search event there
are will be covert surveillance, for preventing its detection it possibly will be deactivated.
If possible, turn off “your” routers and disable WLAN connection on all PCs and peripherals: printers etc.
Arrange ST167 nearly at the center of controlled zone.
