Rev 4.9
SignalFire Telemetry
8
Using the SignalFire Toolkit
The SignalFire Toolkit application can be downloaded at
. After
installation, launch the software and the main toolkit window will open:
Select the COM port associated with the Gateway Stick and click “Auto-Detect Device on COM Port.” This will
open the device configuration window, where all device settings can be configured.
If the Gateway is connected to an Ethernet Module, instead select the Modbus Gateway Stick in the dropdown
menu of the main ToolKit window, and click “Open Device Window”. In the upper left corner, check off the “TCP
Connection” box, type in the IP Address, and click “Open”. The port number (10002) will be automatically
added, so this is not necessary to enter it.
