Page
13
OSD Menu
The user can make adjustment for the wiper
under this menu (suitable for wiper-equipped
dome)
1.NUMBER : Move the cursor to “NUMBER”
and press IRIS OPEN to enter the setup of Wiper
Number. Move the joystick up and down to select
number (1-10),then press IRIS OPEN to confirm.
2.SPEED
:
Move the cursor to “SPEED” and IRIS
OPEN to enter the setup of Wiper Speed. Move
the joystick up and down to select
“HIGH” ,“MID ”OR “ LOW”, then press IRIS
OPEN to confirm.
3.AUX ON
：
Move the cursor to “AUX ON", click IRIS
ON to enter setting mode, move the joystick up
and down to select “ON”,1/2 status, click IRIS
OPEN to confirm.
4.RESET:
When the wiper hide the camera vision,
move cursor to “RESET", click IRIS OPEN,
wiper will return the initial position.
5
.
ACTIVATE
：
Move cursor to “ACTIVATE”, click IRIS
OPEN, wiper will be enabled.
Note: calling Preset 71 will enable the wiper.
MAIN
INFORMATION
( DOME SETTINGS )
MOTION
RESTART
FACTORY
EXIT
DOME SETTINGS
（IR LED）
( WIPER )
( IDLE )
( ALARM )
(PRIVACY MASK)
(ADVANCED)
(OTHERS)
BACK EXIT
( NUMBER:03 )
SPEED:MID
AUX ON:AU*1
RESET
ACTIVATE
BACK EXIT
WIPER
3.2.2 WIPER
OSD Menu
