manualshive.com logo in svg

Sigma SPRIZZA SPZ 40, Instruction, Use And Maintenance Manual

Share
Download
Sigma SPRIZZA SPZ 40 Instruction, Use And Maintenance Manual Download Page 3

Instructions, use and maintenance manual 

Pag. 3/48 

SRIZZA 40

14.5.

Routine maintenance ...................................................................................................................... 28

14.5.1.

Replacing the felt and fixing the new cloth .................................................................................29

14.5.2.

Belt tensioning procedure ...........................................................................................................30

14.5.3.

Replacing the counterweight cable .............................................................................................31

14.5.4.

14.4.4.How to tension belts and chains ......................................................................................32

14.6.

Special maintenance ....................................................................................................................... 33

14.7.

Machine cleaning ............................................................................................................................ 34

15.

Troubleshooting ................................................................................................................................ 35

15.1.

Machine lock-up and necessary solutions ...................................................................................... 35

16.

Machine exploded view..................................................................................................................... 36

16.1.

Casing exploded view ..................................................................................................................... 45

17.

Recommended spare parts and optional ........................................................................................ 46

17.1.

Recommended spare parts ............................................................................................................. 46

17.2.

Recommended spare electrical parts .............................................................................................. 46

17.3.

Optional ........................................................................................................................................... 46

18.

Electrical Drawing ............................................................................................................................. 47

19.

Demolition and disposal ................................................................................................................... 48

19.1.

Obligations of informing users ......................................................................................................... 48

 

 

Summary of Contents for SPRIZZA SPZ 40

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands