![background image](http://html1.mh-extra.com/html/sigma/sprizza-spz-40/sprizza-spz-40_instruction-use-and-maintenance-manual_1267920018.webp)
Instructions, use and maintenance manual
Pag. 18/48
SRIZZA 40
11. Transport and installation
11.1. Machine on pallet
Make sure that the lifting equipment capacity is adequate to the load.
Widen the lifting forks as much as possible and make sure they stick out from the pallet.
Work in an area free from persons and animals.
During movement, always keep the load as close to the ground as possible.
Use the required P.P.E. (e.g. shoes with reinforced tip).
Standards on lifting using a forklift truck: always use a pallet to move the machine.
11.2. Machine without pallet
To remove the machine from the pallet, lift it as shown in the figure below, with appropriately robust
straps.
Make sure that the lifting equipment is adequate to the load, work in an uncluttered area and, during
movements, always keep the load as close to the ground as possible.
Use the required P.P.E. (e.g. shoes with reinforced tip and non-slip sole, gloves and helmet).
During lifting the machine may be slightly tilted (10-15 degrees).