64
z
It is possible to change the exposure timing of mirror lock-up photography.
Please set from [
Capture Settings
] (
P.28
)
→
[
UP
setting
].
Shutter button
(Default)
After the mirror is raised, exposure will be measured by
pressing the shutter button halfway.
after 2 sec
Exposure will be measured 2 seconds after the mirror is
raised.
after 10 sec
Exposure will be measured 10 seconds after the mirror is
raised.
z
When [
after 2 sec
] or [
after 10 sec
] is set and [
Timer sound
] in [
Camera
Settings
] (
P.28
) is set to [
On
], an electric beep will sound during the self-timer
operation. If you would like to cancel the electronic beeping sound, please set
it to [
Off
].
CAUTION !!
•
Mirror lock up will cancel automatically, and mirror will return to its original
position, after 30 seconds. You can reactivate the mirror lock-up function by
pressing the shutter button halfway again.
WARNING !!
•
If you are using this function in a strong light source, the shutter curtain may
become particularly hot by light entering through the lens. It could cause
damage or fire. Please refrain from using the mirror look-up function in such
an environment.
TIP
•
It is possible to use Mirror Lock-up with remote control (Sold Separetely).
Please refer to page
78-80
.