![background image](http://html1.mh-extra.com/html/sigma/sd1-merrill/sd1-merrill_user-manual_1267811052.webp)
51
USING THE BUILT-IN FLASH
The camera has a built-in flash for taking pictures at night or in low
light.
USING THE BUILT-IN FLASH
P
mode, use this mode for automatic
photography. The flash sync speed and
aperture value are set automatically. If the
subject is too dark, the flash indicator ” ”
in viewfinder will blink, then you can take
a flash exposure by following.
1
Press the button to pop up the built-in
flash.
2
Wait for the
mark to appear in the
viewfinder.
z
When the built-in flash pops, it will start charging. While the built-in flash is
charging, the
mark is not visible, but when the flash is sufficiently charged,
the indicator in viewfinder will display the
mark.
z
During the charging, the shutter cannot be released.
z
After you finish using the built-in flash, close the flash head by pressing the top
part of the flash down.
z
When you use the built-in flash continuously, the grip of the camera will
become warm. This is normal and not a defect.
CAUTION !!
•
The lens hood may intrude into the light path of the built-in flash unit, resulting
in a shadow at the bottom of the picture. (The same phenomenon is possible
with a lens, which has a large front lens and long length) Either remove the
lens hood, or use an external Sigma dedicated flash.