7. TRAINING
All current information about your training or route
can be found in the training menu. If you are starting
a navigation or you would like to follow a track, you will
end in the training menu after you have made your
selection.
NOTE:
You must push the “start” button to record
your ride and you must push the “stop”
button to finish recording your ride.
The most important settings can be found in the
short
cut menu
. To open the menu, you have to swipe from
top to bottom.
– Backlight Adjustment
To save battery it is recommended to use “auto” setting
– Mark Position
You can mark a position at any time. You can find them in your favorites
– Altitude Calibration
It is highly recommended to use the auto setting. Once the ROX 12.0 SPORT has GPS fixed,
the altitude will be calibrated automatically. Please note, that the calibration will only be executed
when the training is not started.
– Auto Pause
When you start or stop your tour, the recording will be started or stopped automatically.
– Calibrate Compass
– Sync Sensors
If a sensor is not found, please make sure it is activated. If yes, push “sync sensor” to start
the search for the known sensors again
– Strava Live Segment (ON/OFF)
– Zero Offset Calibration
If your power meter is connected, you can perform the zero-offset calibration
THERE IS NO ONGOING NAVIGATION, FOLLOWING ITEMS ARE AVAILABLE:
