background image

15 

 16)

 

RISKS, PROHIBITIONS, OBLIGAS

 
 
 
 
 
 

 
 
 

 

 
 
 
 
 

 

 

 
 
 
 
 
 
 

 

 

 
 
 
 
 
 

17) ELIMINATION:  The buyer is responsible if the machine goes out of order. The 
disassembly of the mechanical and electrical parts   should be done by the competent 
staff.The machine should be eliminated locally following the local rules and regulations 
 

Do not put out the 
fire with water 

Do not start the mixer before 
having checked the protection 

Do not clean the mixer while it 
is running 

380 V 

The use of the whisk for too hard 
dough can cause the breaking of 
some parts  that could also go out of 
the grid. 

Strong strikes can release the safety grid. The 
machine stops immediately. DO NOT touch 
anything without disconnecting the machine. 

The weight of the bowl is 25 kg and should be lifted 
only with the special grips.  
Put the machine onto flat surfaces at a height 
confortable for the operator.

 

 

Steadiness of the machine:if the machine 
should be placed onto wet or greasy 
surfaces or on unstable laces(ships,planes or 
other), take off the feet and fix the machine 
on the floor using the special holes. 

 

Summary of Contents for PE 7.5
















Reviews: