Attaching the bracket
Attaching the MC 1812 and initial use
www.sigmasport.com
MC 1812
Page
7
MC 1812
2
Attaching the MC 1812 and initial use
Detailed attachment information can be found in the quick start guide provided.
2.1 Attaching the bracket
−
Attachment to the handlebars or cockpit
−
Remove the adhesive tape from the bracket (permanent attachment)
−
The bracket can be attached using either cable ties (permanent attachment)
or the O-rings.
2.2 Attaching the sensor
−
Use the cable ties to attach the sensor to the front wheel fork.
−
Ensure that the sensor cable cannot rub anywhere.
−
The sensor cable must have enough play when turning the handlebars.
2.3 Connecting the sensor to the bracket
−
Guide a sensor cable contact head from below into the left, lower section of
the bracket.
−
Insert the cable with the contact head into the opening from the top.
−
Press the contact head into the bracket.
−
Now guide the other end of the sensor cable into the right, lower section of
the bracket from below.
−
Insert the cable with the contact head into the lower of the two openings
from above.
−
Press the contact head into the bracket.
−
The sensor is now connected to the bracket.
