Reset
Set
Reset
Reset
Display backlight
General MC 1812 functions
www.sigmasport.com
MC 1812
Page
17
MC 1812
5
General MC 1812 functions
WARNING
Do not operate the device while riding. A lack of attention to the other traffic on
the road can lead to accidents with serious material damage, personal injury or
even death. You bear full responsibility for the use of this device.
Press any button on the MC 1812 to exit standby mode. The speed indicator
appears in the top display segment and ‘Trip distance’, for example, appears in
the bottom display segment.
To activate the functions described below, simply scroll to the relevant function by
pressing
Mode 1
(forward) or
Set
(backward).
5.1 Display backlight
The backlight function is switched on/off by simultaneously pressing the
Set
and
Reset
buttons. ‘Light On’ or ‘Light Off’ briefly appears on the display.
The display lights up for three seconds when any button is pressed; it switches to
the respective function when the button is pressed a second time.
5.2 Trip distance
The trip distance is automatically recorded each time the computer is started.
Press the
Reset
button to reset the distance traveled.
The function is used, for example, to record the length of a specific trip.
5.3 Trip time
The trip time is automatically recorded each time the computer is started. Press
the
Reset
to reset the recorded time.
The function is used, for example, to record the duration of a specific trip.
