46
A APERTURE PRIORITY AE
After you set the aperture, the camera will determine the
appropriate shutter speed. If you select smaller apertures, depth of
field will be greater. Larger apertures tend to blur the background,
as depth of field will be shallower.
1
Set the Exposure Mode to the
A
position.
(The aperture value indicator is illuminated
in green.)
2
Set the desired aperture value by
rotating the Command Dial.
(The aperture value can be set in 1/3
stop increments from F2.8 to F16.)
3
Press the shutter button “half-way” to
verify the focus and take the picture.
x
Depending on the selected aperture value, the camera automatically sets
the shutter speed in following range.
Aperture
Shutter
Speed
F2.8 ~ F3.5
30s ~ 1/1250s
F4.0 ~ F5.0
30s ~ 1/1600s
F5.6 ~ F16
30s ~ 1/2000s
WARNING !!
x
When
is shown on the color LCD monitor, camera shake may
occur (the shutter speed is set slower than 1/25). If this mark is
displayed, please use the flash (
P.78
) or a tripod.
x
If the appropriate shutter speed is outside the range of suitable
combinations due to the subject being too bright or too dark, the
shutter speed indicator will blink. If the subject is too bright, set the
aperture value to a smaller one (larger F-number). If the subject is
too dark, set the aperture value to a larger one (smaller F-number)
until the indicator stops blinking.
