Version 06/2007, Rev. 1.15 of 16/09/2011 - sb
page 16 of 75
Translation of the original operating manual
2.4
Safety Instructions for Centrifugation
•
Ensure that the centrifuge was set up properly (see section 4.2 “Installation”,
page 23).
•
Check the centrifuge, rotor, and accessories for external signs of damage
prior to start-up.
•
Do not use the centrifuge with rotors and accessories that have not been
approved by the manufacturer. In case of doubt, contact our service team
(See 6.2.7 "Service Contact", page 46).
•
Ensure that rotor and buckets are correctly fitted (see 5.2.3 "Installation of
Rotors“, page 29 and Fig. 2.3).
•
Please observe the instructions on the installation of accessories (see 5.2.4,
page 31).
•
The load of the rotor as defined by the manufacturer and the maximum speed
must not be exceeded (see the engraving on the rotor or bucket).
•
The rotor must be loaded symmetrically at equal weights.
Fig. 2.3: Fitting of the buckets
1
2
1
Bucket installed correctly
2
Inadmissible operating state
