Laboratory Centrifuge Sigma 3-16L
Laboratory Centrifuge Sigma 3-16L IVD
3 Safety
Version 03/2014, Rev. 2.11 of 11/08/2017
• sb
17 / 79
Translation of the original operating manual, part no. 0700902
Pos : 37 / 100 Sigma/ 100 BA Zentrif ugen Sigma (Standar dmodule)/ 030 Sic her heit /030-0031 Ver ant wort ung des Betrei bers IVD @ 26\ mod_1405319016560_68. doc x @ 191975 @ 2 @ 1
3.3
Responsibility of the operator
The operator undertakes to authorise only trained, specialised personnel to
work on the centrifuge (see chapter 3.4 - "Operating personnel").
The areas of responsibility of the personnel concerning the operation,
maintenance, and care of the unit must be clearly defined.
The safety-conscious work of the personnel in compliance with the
operating manual and the relevant EC health and safety directives, and the
national laws concerning health and safety and the prevention of accidents
must be checked at regular intervals (e.g. every month).
Under the international rules for health and safety at work, the operator is
obliged to:
• take measures in order to prevent danger to life or health during work.
• ensure that the centrifuges are used properly and entirely as intended
(see chapter 1.2 - "Intended use").
• take protective measures against fire and explosion when working with
hazardous substances.
• take measures for the safe opening of the centrifuges.
Pos : 38 / 010 U ni vers al module/ Leerz eile @ 0\ mod_1202116244500_0. doc x @ 114 @ @ 1
Pos : 39 / 100 Sigma/ 100 BA Zentrif ugen Sigma (Standar dmodule)/ 030 Sic her heit /030-0041 Bedienpers onal I VD @ 26\ mod_1405319018891_68. doc x @ 192003 @ 2 @ 1
3.4
Operating personnel
Only trained, specialised personnel are authorised to operate the unit. The
persons operating the unit must
• be familiar with the fundamental health, safety, and accident prevention
regulations.
• have read and understood this operating manual, in particular the safety
sections and warning notes, and confirmed this with their signature.
Pos : 40 / 010 U ni vers al module/ Leerz eile @ 0\ mod_1202116244500_0. doc x @ 114 @ @ 1
Pos : 41 / 100 Sigma/ 100 BA Zentrif ugen Sigma (Standar dmodule)/ 030 Sic her heit /030-0050 I nf or melle Sic herheits hinweise @ 26\ mod_1405319019966_68. doc x @ 192017 @ 2 @ 1
3.5
Informal safety instructions
• This operating manual is a part of the product.
• The operating manual must be kept at the location of use of the
centrifuge. Ensure that it is accessible at all times.
• The operating manual must be handed over to any subsequent owner
or operator of the centrifuge.
• Any changes made must be added to the operating manual.
• In addition to the operating manual, the general and local rules and
regulations concerning the prevention of accidents and the protection of
the environment must also be supplied.
• Safety and danger indications on the centrifuge must be kept readable
at all times. If necessary, they must be replaced.
Pos : 42 / 010 U ni vers al module/ Seitenwec hsel @ 0\ mod_1202116244312_0. doc x @ 105 @ @ 1
