- 20 -
5.3.4.7 Unit selection
a.
Selection method is the same as “frequency and probe selection” a.
b.
When choose the measurement unit, the instrument default the unit automatically ,
conductivity value unit will change to the default units automatically on any surface , the
value is updated based on the conversion between the two units, and storage of
conductivity values is the same as the default unit until the next change.
5.3.4.8 Back-light selection
a.
press upward keys” ” or downward key " " to select (tick inside the block),
press the "OK" button to confirm “ open” or “close ”, and then exist and return into
the main setting interface.
Summary of Contents for 2008 B1
Page 17: ... 14 ...
